More on copper green

In addition to the reaction between copper green and EDP which I talked about last week, copper green reacts with iris orange or raku glass, manufactured by Reichenbach.  This glass has a COE of 96 and so can't be used in large quantities with COE 104 glass, but it can be used as frit, small particles of glass used on the surface of COE 104 glass.  When it is used in this way with copper green, it produces a bright turquoise line of color adjacent to the raku, as shown in this picture:

The top bead is made with lines of raku stringer over a copper green bead.  I make the stringer by tipping the hot tip of a clear glass rod into raku frit, melting and repeating until I have a nice gather of raku.  Then I pull it into a medium diameter stringer, which I apply to the copper green core.  After melting in the raku stringer, I added a few twists for visual interest.  The bottom two beads were made by dipping a core bead of copper green into raku frit, melting the frit in and adding twists.  As usual, look for jewelry made from similar beads in my Etsy shop:  etsy.com/shop/DeborahDRoss.

Copper green and EDP

One of my favorite colors of Effetre glass is copper green (219).  I like the minty green color when it is used alone.  I think it goes particularly well with black.  It also produces an interesting reaction with Effetre purple (254- also known as Evil Devitrifying Purple because it tends to lose its glassy sheen and become matte if mishandled), which Lynn Short reported on at a recent meeting of Southern Flames. The effect is shown in the beads below:

The color of the copper green glass in proximity to the EDP intensifies to a bright turquoise.  When copper green stringer is applied to an EDP base, there is a line of intense turquoise surrounded by lighter green Upper middle).  The bottom two beads show the effect of EDP stringers on a base bead of copper green.  The downside of using this effect is the possibility of EDP devitrifying and producing a white scum, which it does quite easily.  As suggested on the forum Wetcanvas, right before you finish the bead, put it in the hottest part of the flame until the purple turns glassy.  Then take it out and don't put it back into the flame. 

Silvered ivory stringer

I downloaded Jacqueline Parke's ebook "Gems in Bloom" about a month ago, and I have been having fun playing with silvered ivory stringer.   First, heat the tip of an ivory rod and roll it in silver foil.  Burnish it in, then burn if off and heat until it forms a gather.  Pull into a stringer and use it to decorate beads.  Some of mine, suggested by Jacqueline's color combinations, are shown below:

From left to right, red roof tile with black, ivory with black, copper green with a little bit of EDP thrown in, and CIM Canyon de Chelly, all with stringers of silvered ivory around the middle of the beat.  Effetre glass unless otherwise noted.

Next, I played with swirling the glass and adding a 1mm clear cubic zirconium:

I've always had trouble holding the cubic zirconium in tweezers, so I decided to do a search for other methods and found that you can use a drop of white glue on the tip of a mandrel to pick up the flat side of the stone.  Place the mandrel upright in a rack until the glue is dry, then use it to place your stone on the bead.  The glue will burn off without a residue.

I've had so much fun playing that I haven't had time to make jewelry with any of these stones, but expect to see finished pieces in my Etsy shop (etsy.com/shop/DeborahDRoss) soon.